CORVUS TERRAIN T21 Скачать руководство пользователя страница 39

Страница: 39 / 84

USER

MANUAL

* Equipment available depending on version.

We reserve the right to modify the product and the design.

start-up procedure

use of the rear differential lock and unlock*

begin driving

with your CORVUS, follow these steps:

1. Step on the brake pedal, without stepping on the accelerator.

2. Put the gear lever in L, H or R.

3. Release the parking brake. Make sure that is completely disconnected.

4. Accelerate gently in the selected gear. When accelerating the vehicle, it is

possible that on occasions it may not move and it may make a small metallic

noise. This is due to the fact that the gear has not been fully engaged; in this

case, stop accelerating and wait for the engine to return to idling speed,

push the shift lever in the direction you want to go and accelerate gently

at the same time, you will notice a "click" on the shift lever which confirms

that the gear has been fully engaged. You can now release the gearshift

lever and start moving.

To minimise component wear, we recommend that you engage the

lock when the vehicle is at a complete standstill.

It must NEVER be used on the road or on asphalt. The lock may only

be used up to 20 km/h.

Failure to comply with this instruction can cause severe damage to

the transmission system and the driveline.

LOCK

the rear differential, perform the following steps:

1. Step on the brake pedal, without stepping on the accelerator.

2. Disconnect the hand brake. Make sure that is completely disconnected.

3. Put the gearshift lever into NEUTRAL (N) - central position.

UNLOCK

the rear differential, perform the following steps:

1. With the vehicle completely stopped, step on the brake pedal, without

applying the accelerator.

2. Put the gearshift lever into NEUTRAL (N) - central position.

Содержание TERRAIN T21





















































































Результаты поиска

Содержание TERRAIN T21

Отзывы:

Похожие инструкции для TERRAIN T21

Бренды по названию

Популярные бренды

CORVUS TERRAIN T21, Руководство пользователя

Результаты поиска

Содержание TERRAIN T21

Отзывы:

Похожие инструкции для TERRAIN T21

Бренды по названию

Популярные бренды