USB Charging Kit Installation
A
.
Flush to dash/panel requires drilling a ¾” hole in the dash
B
.
Flush with Support bracket
(use this option to mount USB terminal without
drilling)
A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
(See
Fig. 9
)
Fig. 9
Step drill bit
2.
Insert 3ft. USB cable male terminal (See
Fig. 10
) through ¾” hole
created in step 1 and plug into USB port on harness (See
Fig. 11
)
Fig. 10
Flush mount 3 ft. USB cable
Fig. 11
3.
Push USB head (See
Fig. 12
) until it snaps in place and flush with
mounting surface (See
Fig. 13
)
Fig. 12
Flush mount USB Terminal
Fig. 13
Flush mounted to dash
