Pairing:
Pairing process varies among devices but the basic steps are the same. This
process is done upon initial install and will not have to be repeated.
1.
Turn Ignition and Radio “ON”
Red LED inside adapter peephole will flash (pairing mode)
2.
On A2DP device: Go to
Settings, Wireless & Networks, Bluetooth
Settings
3.
Select
Bluetooth
and turn on.
4.
Select Bluetooth settings
5.
Tap
Scan (Search) for devices
.
6.
Wait for Bluetooth device name to appear and select it.
Red LED inside adapter peephole will glow steady (paired)
Optional equipment:
The following options are not required for
the module to work; however, these two options enhance user experience.
To add remote to order simply tick box on product page
1. Remote Control:
This wireless remote is not required for adapter to work, however instead
of fumbling audio device, you simply press the familiar remote control
buttons while also keeping your eyes on the road.
Optional remote control allows users to:
1.
Control music wirelessly
2.
Activate VR commands (Siri, Google play etc.)
3.
Track up/down
4.
Volume up/down
Pairing Bluetooth remote: