NL
DE
EN
91
CUSTOMER MANUAL M400 DRIVE SYSTEM
Display content
Explanation
Display content
Explanation
TEMP
Current temperature
Cycle Times
Cycle Times
TotalVolt
Battery voltage
Max Uncharge Time
Max Uncharge Time
Current
current
Last Uncharge Time
Last Uncharge Time
Res Cap
remaining battery capacity
Total Cell
The number of cell
Full Cap
Battery capacity of Full charged
Cell Voltage 1
Voltage Cell 1
RelChargeState
Relative Charge in percentage
Cell Voltage 2
Voltage Cell 2
AbsChargeState
Absolute Charge in percentage
Cell Voltage n
Voltage Cell n
Briefly press for two tiems (interval time is less than 0.5S) to exit back to main interface or select “BACK”
→
“BACK”
→
“EXIT” to exit back to the main interface.
⑶
“Error Code” history check
Briefly press (
<
0.5S)
or to select “Error Code” and briefly press (<0.5S) to enter into the interface. “E-CODE”
indicate the error information for last ten times. “E-CODE 1” represents the error content for the last time.
“E-CODE 10” represents the error content up to the tenth time. The maximum ten records can be kept. Error code “00”
means no error. Please see the error code table to know about the definition of the other codes.
