7
IV. ASSEMBLY INSTRUCTIONS
1. Install (#3) into (#2) as shown and attach them together on both sides of (#1) with:
•
2x (#14)
•
4x bolts (#21)
•
4x flat spacer (#29)
•
4x nut (#30)
2. Pre-install (#13) and 2x bolts (#22) under (#1) as shown.
3. Preload (#12) and 2x bolts (#22) under (#2) and (#3) as shown.
STEP 1
ASSEMBLY INSTRUCTIONS |
NOTE:
1. The gasket needs to be placed at both ends of the bolts (against the bolt head and nut),
as shown in images.
2. Do not fully tighten all bolts until the end. During assembly tighten all bolts and nuts by
hand first then tighten with wrench at the end.
3. Some spare parts have been pre-assembled in the factory.
4. It is recommended to have assistance during assembly (e.g., 2 person).
3
30
29
14
13
22
12
22
14
30
2
1
21
