COR-ACC900
COR-ACC900
G
Abnormal
Single Tag
RF Learn Function
Access programming
mode
*123456# or
*Master Code#
(If already changed)
19*UUUUU*QQQQQ#
UUUUU=5-digit User
Address: 00000~01023
QQQQQ: Input 00001
(Only one tag)
(i.e. 19*00001*00001)
Close Tag into RF Area
Present the tag to the
controller.
OK
(Memory location
number)
Random Tag NO.
Access programming
mode
*123456# or
*Master Code#
(If already changed)
19*UUUUU*QQQQQ#
UUUUU=5-digit User
Address:00000~01023
QQQQQ: Input 00001
Close Tag into RF Area
Present the tag to the
controller.
OK
(Memory location number)
The First tag has now been
added, present the rest of
the tags one after the other
to add them to the system
as well.
Sequential Tag NO.
Access programming
mode
*123456# or
*Master Code#
(If already changed)
19*UUUUU*QQQQQ#
UUUUU=5-digit User
Address: 00000~01023
QQQQQ: Input 5-digit tag
units: Enter the
quantity
of tags
to be added.
(i.e.: 10 pcs of sequential
tag=00010)
Close Tag into RF Area
Present the tag with the
lowest number
to the
controller.
OK
(Memory location number)
A Batch of Tags
Adding Tag (M4/M8)
Deleting Tag (M4/M8)
Single Tag
Memory Location
A Batch of Tags
Memory Location
Delete All Tags
Access programming
mode
*123456# or
*Master Code#
(If already changed)
10*SSSSS9EEEEE#
9=Delete
SSSSS=starting user
address
EEEEE=ending user
address
(i.e. Delete User Address
00003=10*00003900003)
Done
Access programming
mode
*123456# or *Master Code#
(If already changed)
10*SSSSS9EEEEE#
9=Delete
SSSSS=starting user
address
EEEEE=ending user
address
(i.e. Delete User Address:
00004~00010=10*00004900010)
Done
Access programming
mode
*123456# or
*Master Code#
(If already changed)
29*29*#
Done
M4/M8 (Default Value: M4)
Deleting Tag (M6)
M6
Access programming
mode
*123456# or
*Master Code#
(If already changed)
11*SSSSS*EEEEE#
SSSSS
=starting user
address=5-digit card code
EEEEE
=ending user
address=5-digit card code
(i.e. Add a tag with card
code 15031=
11*15031*15031)
(i.e. Add a batch of tag
with card code
15031~15038=
11*15031*15038)
Done
Access programming
mode
*123456# or
*Master Code#
(If already changed)
10*SSSSS*EEEEE#
or
10*SSSSS9EEEEE#
SSSSS
=starting user
address=5-digit card code
EEEEE
=ending user
address=5-digit card code
(i.e. Delete a tag with card
code 15031=
11*15031*15031)
(i.e. Delete a batch of tag
with card code
15031~15038=
11*15031*15038)
Done
Access programming
mode
*123456# or
*Master Code#
(If already changed)
29*29*#
Done
Adding Tag (M6)
Delete Single/A Batch Tag
Delete All Tag
Enable: Access programming mode
→ press
* *
#
Disable: Access programming mode
→ press * #
Enable/Disable: Flash card +
press 4 digit arming PWD PPPP#
(default: 1234)
By Keypad
By flashing card + Arming PWD
Q: How to enable/disable the arming status?
A:
02
03
06
05
28
To set how long the door relay (lock release) is active after presenting a card.
Range: 0 ~ 600 (sec.); 601~609 (0.1~0.9 second)
To set value “0” will make door remain opening till card presented again, then door close. (Default value: 7 sec.)
To set how long the door contact can remain opening before activating the alarm.(Default value: 15 sec.)
When an alarm condition has arisen, the alarm will activate for this duration. Range: 1 ~ 600 (sec.)
To set value “0” will make alarm relay keep on until disarming, then alarm relay off. (Default value: 7 sec.)
To delay the activation of the alarm relay after an alarm condition has arisen, so that user can have enough time
to disable alarm. (Default value: 1 sec.)
To delay the time of enabling arming, so that user can have enough time to disable arming.
Range: 1 ~ 600 (sec.) (Default value: 1 sec.)
Activate the alarm immediately w/o having any alarm delay TM
Command
18
Adding and Deleting Tag
V150911
