Cortex BH-8, Руководство пользователя

Страница: 6 / 10

6
4. ASSEMBLY INSTRUCTIONS
Step 1
1. According to the figure, first install the
adjustment pad (# 2) below the main bow
(# 1).
2. Place the barbell hook (# 3) on the main
bow (# 1) as shown and fasten it with the
countersunk bolt M10 * 65 (# 4), the flat
washer (# 5), and the nut (# 6).
3. Repeat the steps for the other side.
NOTE:
1. Gaskets shall be placed at both ends of the bolt (against bolt head and nut), as otherwise stated.
2. The initial assembly is to tighten all bolts and nuts by hand, and to tighten them with wrenches
when fully assembled.
3. Some spare parts have been pre-assembled in the factory.
4. This product is recommended for installation by more than two people