Cortelco 586002-TP2-27F Скачать руководство пользователя страница 5

 

 

 
 

 

 

586002TP227F User’s Manual

 5 

Important Safety Instructions 

 

BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE 

FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY, INCLUDING THE FOLLOWING: 

 

1.

 

Read and understand all instructions. 

2.

 

Follow all warnings and instructions marked on the product. 

3.

 

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a 

damp cloth for cleaning. 

4.

 

Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet 
basement, or near a swimming pool. 

5.

 

Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to 

the product. 

6.

 

Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it from 
overheating, these openings must not be blocked or covered. The openings should never be blocked by placing 

the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a 

radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is 

provided. 

7.

 

This product should be operated only from the type of power source indicated on the marking label. If you are not 

sure of the type of power supply to your home, consult your dealer or local power company. 

8.

 

Do not allow anything to rest on the power cord. Do not locate this product where the cord will be damaged by 

persons walking on it. 

9.

 

Do not overload wall outlet extension cords, as this can result in the risk of fire or electric shock. 

10.

 

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage 

points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on this 

product. 

11.

 

To reduce the risk of electric shock, do not disassemble this product. Instead, when some repair work is required, 

take the unit to a qualified technician. Opening or removing covers may expose you to dangerous voltages or 

other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 

12.

 

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following 
conditions: 

a.

 

When the power supply cord or plug is damaged or frayed. 

b.

 

If liquid has been spilled into the product. 

c.

 

If the product has been exposed to rain or water. 

d.

 

If the product does not operate normally by following the operating instructions. Adjust only those controls 

that are covered by the operating instructions because improper adjustment of other controls may result in 

damage and will often require extensive work by a qualified technician to restore the product to normal 

operation. 

e.

 

If the product has been dropped or cabinet has be damaged. 

f.

 

If the product exhibits a distinct change in performance. 

13.

 

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of 
electrical shock from lightning. 

14.

 

Do not use the telephone to report a gas leak in the vicinity of the leak. 

15.

 

This power unit is intended to be correctly oriented in a vertical or floor mount position. 

16.

 

Plug the power adaptor into an electrical outlet that is near the equipment and easily accessible. 

 

SAVE THESE INSTRUCTIONS 

 
 

 

Содержание 586002-TP2-27F





















Отзывы: