background image

 

 

 
 

 

 

586002TP227F User’s Manual

 19 

 

 

 

 
 

 

 

FCC I

NFORMATION

 

 

Part 68

 is a Federal regulation which requires equipment to be tested and registered with the FCC prior to its 

connection to the network.  This equipment complies with Part 68 of FCC rules.  On the bottom of the telephone is a 
label that contains, among other information, the FCC Registration Number and the  Ringer Equivalence Number (REN) 

for this equipment.  You must, upon request, provide this information to your telephone company.  

 

 
The 

Ringer Equivalence Number

, which is used to determine the number of devices you may connect to your 

phone line, indicates the amount of power that your telephone draws from the telephone company line during 
ringing. If you have more than one telephone (or other terminal device) connected to the telephone company line, 
you should total the ringer equivalence numbers (REN s), and be sure that the total is not more than five. Your 
telephones may not ring if the total is more than five. Also, in some rural locations, your telephone may not ring if 
the REN total is more than three. 
 

RESTRICTIONS

  You must not connect your telephone to coin-operated lines or party lines. 

 

INSTALLATION

   This model telephone must be connected to the telephone company lines through a modular 

jack. The required USOC for the modular jack is RJ11C for desk mounting and RJ11W for wall mounting. The 
USOC number is printed on the label on the bottom of your telephone. 
 

HEARING-AID COMPATIBILITY

  The handset on your telephone will work with magnetically-coupled hearing 

aids. You can use a hearing aid equipped with a T (Telephone) switch. 
 

IN CASE OF TROUBLE 

 If your telephone should cause problems on the telephone line, the telephone company 

can temporarily disconnect your service. The telephone company must then notify and allow you to correct the 
problem. 
 
The telephone company may from time to time change its lines or equipment. They must notify you if planned 
changes will affect your telephone service, to allow you to take steps to prevent interruptions. 
 

Part 15

 regulates the electromagnetic energy emitted by equipment to minimize interference to radio, television, 

and other wireless devices.  This telephone complies with Part 15 of the FCC Rules.  In the unlikely event that 
interference occurs, move the telephone and/or radio, television, etc. to increase the separation distance. 

 
 
 
 
 
 
 
 
 

 
 

 

Содержание 586002-TP2-27F





















Отзывы: