
586002TP227F User’s Manual
18
Press
Menu/OK
again. Now, press
▲
or
▼
to adjust ringer volume or select a ringer melody. Press
Menu/OK
to
confirm your selection.
Reset Base
In the
Base Settings
menu, scroll
▼
to
>Reset Base
, and then press
Menu/OK
.
You will see
Reset to default
. Scroll
▼
to
>Yes
, and then press
Menu/OK
.
You will see Base is reset to default.
Additional
In the
Base Settings
menu, scroll
▼
to
>Additional
, and then press
Menu/OK
.
Scroll
▼
/
▲
to select >Dial Mode, >Flash Time or >Prefix Dial No., and then press Menu/OK.
>Dial Mode
– Press
▲
or
▼
to select
>Tone
or
>Pulse
, and then press
Menu/OK
to confirm your selection.
>Flash Time
– Press
▲
or
▼
to select the desired flash time (preset to 600 ms), and then press
Menu/OK
to confirm
your selection.
>Prefix Dial No
. –
Enter
your
Base PIN
. Next, enter the desired prefix number, up to 22 digits, and then press
Menu/OK
. This prefix will be dialed at the beginning of
every
call you make. However, it will
not
be displayed on the
screen. If you decide to stop using this feature,
make sure you
return to this setting, and use DEL/Mute to delete
the Prefix Dial Number!!!!!
Press
DEL/Mute
to return to the idle screen.
Call Barring
When you see >Call Barring, press
Menu/OK
. Enter the Base PIN.
Enter the number or number sequence that, if dialed, will prevent the Handset from dialing. For example, if you do not
want long distance calls to go out (calls that begin with ‘1’), simply enter
1
. If you do not want
any
calls to go out, leave
the number field
blank
.
Press
Menu/OK
. Now, press
▲
or
▼
to select
Call Barring >On
.
Press
Menu/OK
to confirm your selection.
WARNING:
To return to full dialling access, you will need to return to the
Call Barring
menu and select
Call Barring
>Off
, following the steps above.
Base Pin
Your Base PIN is factory preset to
0000
. To prevent unauthorized changes to the Base Settings, you can select a new
4-digit PIN (this is optional; you do not have to change the PIN):
In the
Base Settings
menu, scroll
▼
/
▲
to
>Base PIN
, and then press
Menu/OK
.
Your will see
Enter Old PIN :____
. Enter the current Base PIN.
Enter the New Pin :____.
Verify the New Pin :____. You will see Base PIN is saved.
Press
DEL/Mute
to return to the idle screen.