Corsair 2200 Foiler, Руководство пользователя

Страница: 25 / 41

Corsair Foiler 2200 Owner’s Manual - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
ELECTRICAL SYSTEM
The corsair Foiler 2200 operates on a 12 volt DC sys-
tem similar to your automobile. The system consists of
a breaker panel, batteries, and battery switches.
Battery Switches
A separate battery switch isolates each battery. Unless
these are "on", you cannot start your outboards. Also
there is a battery selector switch. It has 4 position; one,
two, both and off. You will need to select either one or
two in order to operate your other electrical devices.
The "both" position should only be used if one of the
batteries is flat. By switching to both you can start
your outboard from the opposite battery.
Batteries
The batteries supplied area AGM type (Absorbent
Glass Mat). These require no maintenance, do not spill
or leak, are shock and vibration resistant with minimal
gas release.
Switch Panel
The switch panel has 6 water resistant rocker style
fused switches. When the red light is illuminated it
indicates the power is "On".
The drawing below gives an overview of how the sys-
tem works.
Navigation Lights
Although activities are limited at night, night cruising
can be pleasurable. Be especially careful of shallow
waters and be on the watch for submerged debris,
rocks, and other obstacles in the water. Navigation
lights are intended for collision avoidance only and are
not intended to improve the operator's night vision.
If your boat has factory installed navigational lights,
the stern light is white, and there is a red and green
lights for the port and starboard side respectively. The
stern light is a removable pole light. To use the light,
line up the two-prong plug in the pole with the recep-
tacle in the base. Plug the light in, and lock into place
with lever/slide lock. During the day, stow the light
inside your boat to keep it out of the way. Navigational
lights are permanently installed on the deck.
Check lights for proper operation before heading out.
You should also learn to identify the running light com-
binations for other vessels. We recommend your par-
ticipation in a boating safety course to further learn
about navigation lights and safe boating practices.