32 of 80
CORRADI SPA - USER MANUAL - EXPERIENCE
2 - 04.2014
CE DECLaratIon oF ConForMItY
This CE Declaration of Conformity is subject to compliance with the constraints and indications envisaged in the product warranty, as well as the correct installation by the appointed party in compliance
with the installation and laying instructions provided by Corradi SpA.
Manufacturer:
Corradi SpA
via G. Brini, 39 - 40128 Bologna Italy
Product description:
Experience
Model:
Experience Whithe - RGB, Multisensory
Serial number:
(see CE marking on product)
Production year:
(see CE marking on product)
usage:
(see User handbook - Original Instructions and concerning Warranty)
With the following document the company declares on its own responsibility, that the above
mentioned product satisfies the Directives indicated on the side:
The person authorised to draw up technical documentation is: Engineer Gianmarco Biagi C/o Corradi Via Brini, 39 40128 Bologna
THE MANUFACTURER
I declare that the above described product conforms to the indications and requirements in the above mentioned Directives.
CHIEF EXECUTIVE OFFICER
(*) Directives exclusively applicable to products with motorizations and automations [see User Handbook]
(**) Wind resistance class: the wind resistance class has been verified using installation supports with features as in the Load table in the User Handbook
rEFErEnCE DIrECtIvES applicable to the following CE Declaration of Conformity
Directive 2006/25/CE
Directive EMC 2004/108/CEE
The conformity has been verified with the aid of the following norms:
EN 62471 Photobiological Safety
EN 60529 Degrees of protection provided by enclosures (IP Code) (1991)
EN 60529/A1 Degrees of protection provided by enclosures (IP Code) (2000)
InDICatIon / ConDItIonS to WHICH tHE uSaGE oF tHE ProDuCt IS SubJECt:
The CORRADI product is subject to the installation activity done for the Client.
The Authorized Installer has to draw up and hand over the suitable DECLARATION OF CORRECT INSTALLATION AND CLASSIFICATION OF WIND RESISTANCE to the user, which testifies the correct
installation, in accordance with the instructions supplied by the manufacturer and applied in accordance with the state and morphology of the installation site and corresponding to the using conditions
for which it has been realized.
The Installer has to follow the reference instructions in the “INSTALLATION HANDBOOK” and “USER HANDBOOK”.
The Installer fills out and signs the DECLARATION OF CORRECT INSTALLATION AND CLASSIFICATION OF WIND RESISTANCE, in accordance with the model in the USER HANDBOOK.