corob Flex 900, Руководство пользователя

Страница: 40 / 46

36 - ORDINARY MAINTENANCE
COROB™ FLEX 900
7.6 Cleaning and moistening the humidifier cap sponge
In case of sponge replacement, use only those supplied with the machine.
Cap model Operations
Sliding cap
1. Disconnect power supply (chapter 5.7).
2. Open the cap by pushing the opening bar inward with your hand.
3. Unscrew the sponge holding lid and remove it.
4. Bring back the cap in its closed position.
a. Wash the holding lid, check the condition of the sponge and moisten as needed.
The level of the humidifying liquid must not exceed the height of the sponge. If
it is very dirty, remove the sponge from the cap and wash it thoroughly. If the
sponge is severely damaged, replace it.
5. Open the cap with your hand and screw back the sponge holding lid.
6. Connect power supply and switch on the machine (chapter 5.3).
Sliding Autocap
1. Open the Autocap bringing the machine to the off-line 2 condition, by means of
the off-line button (chapter 5.6).
2. Disconnect power supply (chapter 5.7).
3. Unscrew the sponge holding lid and remove it.
a. Wash the holding lid, check the condition of the sponge and moisten as needed.
The level of the humidifying liquid must not exceed the height of the sponge. If
it is very dirty, remove the sponge from the cap and wash it thoroughly. If the
sponge is severely damaged, replace it.
4. Screw back the sponge holding lid.
5. Connect power supply and switch on the machine (chapter 5.3).
6. Close the Autocap bringing the machine to the on-line condition, by means of
the off-line button (chapter 5.6).