corob Flex 900, Руководство пользователя

Страница: 38 / 46

34 - ORDINARY MAINTENANCE
COROB™ FLEX 900
7.4 External cleaning
WARNING
NEVER USE WATER OR SOLVENT-BASED CLEANING PRODUCTS TO CLEAN THE MACHINE.
In case the colorant has poured inside the machine, do not try to clean; turn the machine off at once and
contact an authorized service center.
In case of paint spills, clean the machine immediately.
1. Disconnect power supply (chapter 5.7).
2. Clean coverings, panels and control devices
of the machine, to remove dirt, dust and any
colorant stains, using a soft and dry cloth, or
slightly moistened with a mild cleansing solution.
3. Connect power supply and switch on the machine
(chapter 5.3).
See the manufacturer manual for instructions on
cleaning the computer.
Figure 17
7.5 Cleaning the nozzle center
Cap model Operations
Sliding cap
1. Disconnect power supply (chapter 5.7).
2. Open the cap by pushing the opening bar inward with your hand.
3. Accurately clean the nozzles using a sharp tool; remove any dried colorant
residue delicately, to avoid damaging the ends of the circuits.
4. Bring back the cap in its closed position.
5. Connect power supply and switch on the machine (chapter 5.3).
Sliding Autocap
1. Open the Autocap bringing the machine to the off-line 2 condition, by means of
the off-line button (chapter 5.6).
2. Disconnect power supply (chapter 5.7).
3. Accurately clean the nozzles using a sharp tool; remove any dried colorant
residue delicately, to avoid damaging the ends of the circuits.
4. Connect power supply and switch on the machine (chapter 5.3).
5. Close the Autocap bringing the machine to the on-line condition, by means of
the off-line button (chapter 5.6).