Introduction to the MA2000 System
MobileAccess2000 TSX System Architecture
MA2000 Installation and Configuration Guide
4
antenna. Uplink (UL) signals from the antennas are then converted to optical signals
before being transmitted back to the BU. Each pre-configured RHU supports up to two
services.
•
Add-On Module (AO): The AO is a single service module coupled with an RHU to
deliver an additional, third service at a lower incremental cost. The AO receives RF signal
from the RHU and amplifies it for transport across the broadband coax.
For end-to-end control, controllers installed at the head-end provide direct interface to the MA
elements and through them, control over the remote end elements.
