Standard Recom m ended Procedure 003-1002-BEN | Issue 4 | January 2019 | Page 6 of 26
4.2.2 Pulling
Grip
Rem oval
Step 1:
Remove the pull line and clean any dirt or debris from the outer surfaces of the sleeve.
IM PORTANT:
Disassemble the pulling sleeve on a work surface free from dirt, excessive heat , or any solvents.
Step 2:
Lift the hook-and-loop
aps to expose
the zipper pull. While holding t he sleeve’s
pulling loop with one hand, unzip the
sleeve (Figure
6).
Step 3:
Remove t he clot h sleeve from around the
grip.
Step 4:
Wit h the grip lying on a work surface, grasp the
coupler at the cable-end of the trunk cable. With
a slight tw isting motion, pull the corrugat ed
tube away from the coupler w ith your ot her
hand (Figure
7).
Step 5:
Slow ly slide the tubing aw ay from the coupler and its connector legs (Figure
8).
Figure
6 — Unzipping t he Sleeve
Figure
7 — Grip Disassembly
Figure
8 — Tubing Rem oval
