Standard Recom m ended Procedure 003-1002-BEN | Issue 4 | January 2019 | Page 25 of 26
6.3.2
Cable in U-Clip Cradle
Step 1:
Push in on the latch as show n in Figure
36.
Step 2:
Lift cradle and cable up.
Step 3:
At the same time, push the trunk cable forw ard.
Step 4:
Then lift up to remove the cradle from the plate as show n.
Step 5:
To remove furcation body from the cradle, push the body up from the bottom using your fore
nger.
Alternate method:
Insert a
at-head screw driver into the hole in the cradle to pry up the furcation
body.
Figure
36 — Remove Trunk Cable from U-Clip Cradle
6.4
Changing the Polarit y of an LC Uniboot Connect or
In some applications, it may be desirable to reverse the polarit y of the LC uniboot connector. To do so:
Figure
37 — Reverse Polarit y of t he LC Uniboot Connector
6.5
Changing the Polarit y of an MTP
®
Adapter
If it is necessary, the polarity of an MTP adapter may be reversed. To do so:
Figure
38 — Reverse Polarity of an MTP Adapter
