Standard Recom m ended Procedure 003-1002-BEN | Issue 4 | January 2019 | Page 21 of 26
Step 4: M odule Location with Fiber or Port Range (Figure
31)
Each t ray comes pre-labeled A through F to identify module position w ithin the tray.
Figure
31 — Module Label Locat ion
Step 5:
Documentation (Figure
32)
Identify remote location termination and determine code to be printed. It should only be necessary
to print the remote location. Printed code from label makers may be a
xed to the label card on the
inside of the front door.
Figure
32 — Print Rem ot e Term inat ion Label
