Section 7 – Maintenance
29
Outer guide installation (Stainless Steel)
1. Raise outer guide approximately 1-1/4” higher than already installed coil side guide to align key slots with
slip fit fasteners.
2. Ensure bottom bar bearing is inside of inner guide flange
3. Push outer guide onto inner guide and tap down until guides are flush at bottom and slip fit is snug
4. Secure guides in place with top fastener to bracket
Figure 7.22 – Coil Side Guide installation (FOW)
SLIP FIT
FASTENER
OUTER GUIDE
KEY SLOT
BOTTOM BAR
BEARING
OUTER GUIDE
IN PLACE
1/4-20 X 1/2 BOLT
WASHER
1/4-20 NUT
TO ATTACH GUIDE
TO BRACKET PLATE
NUT AND WASHER
ON OUTSIDE OF
BRACKET PLATE
