shower holder
top rail bracket
slider rail
selector valve
1.
2.
STEP 1
Insert the Top Rail Bracket, Adjustable
Shower Holder, & Bottom Rail Bracket
to the Slider Rail.
STEP 2
Connect the Selector Valve to the
bottom of Slider Rail.
bottom rail bracket
38mm
38mm
1300mm
650mm
wall plug hole
screw
mounting terminal
3.
4.
Select a suitable position for the Rain
Shower Set then mark 4 screws point
(2 on top and 2 on bottom). The gap of
2 screw hole was 38mm. It is
recommended that the Top Rail Bracket
position at height of 1950mm to the floor
and Bottom Rail Bracket 1300mm to the
floor.
wall plug
STEP 4
Use 6mm diameter drill and
make the wall plug holes in
depth of 34mm. Insert the wall
plugs and mounting terminal
firmly in position with the
screw provided.
STEP 5
Mount the Slider Rail (connected
with Rail Bracket, Adjustable
Shower Holder and Selector Valve)
to the mounting terminal
by turns the terminal cover.
5.
STEP 3
1200mm
650mm
100mm
PVC hose
rain
shower
head
shower
head
7.
8.
STEP 7
Connect the Rain Shower Head to the top of
Slider Rail, 1.5Meter PVC Hose to Hand Shower
Head and 1Meter PVC Hose to the Heater.
Connected be sure to put in the Rubber Washer.
STEP 8
Recommended Height for Rain
Shower Set.
rubber
washer
a
b
c
d
rail bracket cap
hexagon tool
plastic nut
6.
STEP 6
Remove the cover and cap from
the Rail Bracket (Fig. 3A) and
screw the rail bracket by turning
the cover clockwise. Using hexagon
tool to tighten the plastic nut to the
desire position and then replace
the cover.
rail bracket
cover
rain
shower
head
continue from RAIN SHOWER SET INSTALLATION PROCEDURES
continue from RAIN SHOWER SET INSTALLATION PROCEDURES