background image

Cornell Communications, Inc 

4800 Design Guide 10-20-16

 

 

 
 
Warranty: 

 

CORNELL 

warrants its products to be free from defects

months from the date of manufacture, under normal use and service.* Obligation of CORNELL is limited to 
repairing or replacing at its option, any part, which, in its opinion, shall be proved defective in ma
workmanship, under normal use and service. This warranty is void if the product is altered, damaged by 
lightning or repaired by anyone other than CORNELL personnel. No other warranty, expressed or implied, will 
be allowed unless agreed to in writing by the factory. 
 

*36 month Warranty does not apply to 3rd Party OEM products which
manufacturer's warranty. Please verify OEM warranty with your Cornell Regional
you have any questions.

 

 
 

Returns: 
 

Warranty returns will be accepted with RMA# for no cost. Defective materials will be repaired for a minimum 
of $100 and cost of the repair will be for time and materials not to exceed the cost of a new unit. Returns of 
unused, unmarked boxed equipment are subject to a M
within 90 days of purchase. ABSOLUTELY NO RETURNS WILL BE ACCEPTED AFTER 90 DAYS. 
Returns of used equipment or custom equipment will not be accepted. All returns/repairs must be adequately 
packaged for shipment.  
 

For an RMA #, (Return Materials 

 

 
 
Agency Approvals: 
  
 
 

 
 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) T
including interference that may cause undesired operation.

 
 

 

Warranty/Returns 

warrants its products to be free from defects in materials and workmanship for thirty

from the date of manufacture, under normal use and service.* Obligation of CORNELL is limited to 

replacing at its option, any part, which, in its opinion, shall be proved defective in ma

under normal use and service. This warranty is void if the product is altered, damaged by 

by anyone other than CORNELL personnel. No other warranty, expressed or implied, will 

ting by the factory.  

*36 month Warranty does not apply to 3rd Party OEM products which carry the original 
manufacturer's warranty. Please verify OEM warranty with your Cornell Regional

ns will be accepted with RMA# for no cost. Defective materials will be repaired for a minimum 

and cost of the repair will be for time and materials not to exceed the cost of a new unit. Returns of 

unused, unmarked boxed equipment are subject to a MANDATORY 25% restocking charge when returned 
within 90 days of purchase. ABSOLUTELY NO RETURNS WILL BE ACCEPTED AFTER 90 DAYS. 
Returns of used equipment or custom equipment will not be accepted. All returns/repairs must be adequately 

aterials Authorization) please call Cornell at 1-800

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

harmful interference, and (2) This device must accept any interference received, 

including interference that may cause undesired operation. 

15 

in materials and workmanship for thirty-six (36) 

from the date of manufacture, under normal use and service.* Obligation of CORNELL is limited to 

replacing at its option, any part, which, in its opinion, shall be proved defective in materials or 

under normal use and service. This warranty is void if the product is altered, damaged by 

by anyone other than CORNELL personnel. No other warranty, expressed or implied, will 

carry the original 

manufacturer's warranty. Please verify OEM warranty with your Cornell Regional Account Manager if 

ns will be accepted with RMA# for no cost. Defective materials will be repaired for a minimum 

and cost of the repair will be for time and materials not to exceed the cost of a new unit. Returns of 

ANDATORY 25% restocking charge when returned 

within 90 days of purchase. ABSOLUTELY NO RETURNS WILL BE ACCEPTED AFTER 90 DAYS. 
Returns of used equipment or custom equipment will not be accepted. All returns/repairs must be adequately 

800-558-8957. 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  

his device must accept any interference received, 

Содержание 4800 series
















Отзывы: