Cornelius Quest Elite 2000, Руководство по установке

Страница: 13 / 22

Quest Elite 2000 Installation Manual
© 2010-2012, IMI Cornelius Inc. - 9 - Publication Number: 620048922INS
COUNTER LOCATION
Select a location in a well ventilated area, close to a grounded electrical outlet. If
possible do not place the unit close to hot and/or steaming machines.
The minimum airflow clearance is: 4” (10.16 cm) in back and 12” (30.48 cm) on
top and open to the front.
IMPORTANT: Condenser air is drawn in from the bottom of the rear
panel and discharged out the top of the rear panel.
Failure to maintain clearance space will reduce
capacity of the unit and cause premature compressor
failure.
The Dispenser needs to be placed using 4 inch legs that are included.
Figure 4. Minimum Clearances
Minimum 12’’ Air Flow
Clearance at Top
Minimum 4’’
Clearance at Back
and 4’’ at Sides