Cornelius Quest Elite 2000, Руководство по установке

Страница: 11 / 22

Quest Elite 2000 Installation Manual
© 2010-2012, IMI Cornelius Inc. - 7 - Publication Number: 620048922INS
APPLICATIONS
This appliance is intended to be used in household and similar applications such
as the following:
• Staff kitchen areas in shops, offices and other working environments.
• Farm houses and by clients in hotels, motels and other residential type envi-
ronments
• Bed and breakfast type environments
• Catering and similar non-retail applications
P
LUMBING
R
EQUIREMENTS
This dispenser must be connected to a COLD WATER system with operating
pressure between 30psi minimum and 60 psi maximum (206.8 kPa and 413.7
kPa). This water source must be capable of producing a minimum flow rate of 3
fluid ounces (88.7 milliliters) per second. A shut off valve should be installed in
the line before the dispenser. Install a regulator in the line when pressure is
greater than 100 psi (690 kPa) to reduce it to 50 psi (345 kPa). The regulator is
also necessary if the water source has pressure fluxuations. The main water
inlet is a 3/8" (9.52 mm) MFL connection (Figure 3).
Figure 3. Plumbing Connection
!
WARNING:
This equipment must be installed to comply with the International Plumbing
Code of the International Code Council and the Food Code Manual of the Food
and Drug Administration (FDA). For models installed outside the U.S.A., you
must comply with the applicable Plumbing/Sanitation Code for your area.
Failure to comply could result in serious injury, death or damage to the
equipment.
Water
Connection