manualshive.com logo in svg

Cornelius IRC1030, Руководство по установке

Поделиться
Скачать
Cornelius IRC1030 Скачать руководство пользователя страница 14

xii

166240001

DISPENSER INSTALLATION

The proper cuber/dispenser installation package should be ordered. This package will include gasket material
and hold-down bracket.

ELECTRICAL SERVICE LINE

MANUAL  DISCONNECT  SWITCH

STRAIN RELIEF

WATER   FILTER

SHUT-OFF  VALVE

DUMP VALVE 

DRAIN TUBE

BIN DRAIN TUBE

FLOOR DRAIN

AEROQUIP VALVE FITTING

PLUMBING CONNECTIONS

1. All plumbing lines and connections must conform to local and national plumbing codes.

2. Line shut-off valves must be located in supply water lines for cuber and condenser if product is water-

cooled. Water supply to water-cooled condenser must include a stand-pipe to prevent “water hammer”.

3. Should your local water supply quality require the installation of a water filter system, consult your local dis-

tributor or dealer for proper size required.

4. Water supply pressure must not be lower than 20 PSI (1.37 BAR), nor should it exceed 120 PSI (8.16

BAR).

IMPORTANT: Water filters larger then 5 microns do not give proper protection. Water pressures above
80 PSI (5.44 BAR) will destroy the filter.

NOTE:

Bin and cuber drain lines must never be connected together and must be vented.

Содержание IRC1030

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды