Cornelius IDC 2XX Скачать руководство пользователя страница 7

IDC Operator’s Manual

Publication Number: 621057403OPR

- 4 -

© 2005-2010, IMI Cornelius Inc.

CLEANING AND MAINTENANCE INSTRUCTIONS 

These instructions are used on all Cornelius ice drink dispensers.

Some models may have additional cleaning requirements. 

Those models will have addition procedures listed later in the manual.

!

WARNING:

Disconnect power to the unit before cleaning or servicing following all lock out / tag out procedures established by 
the user. Verify all of the power is off to the unit before performing any work. 

Failure to comply could result in serious injury, death or damage to the equipment.

CAUTION:

!

Do not use metal scrapers, sharp objects or abrasives on the ice storage hopper, top cover, agitator disc or 
exterior surfaces as damage to the unit may result. Do not use solvents or other cleaning agents as they may 
attack the material resulting in damage to the unit.

Soap solution

 – Use a mixture of mild detergent and warm (100° F ) potable water. 

Sanitizing Solution

 – Dissolve 2 packets (4 oz) of Stera Sheen Green Label into 2 gallons of warm (80 – 100° F) 

potable water to ensure 200 ppm of chlorine.

Daily Cleaning:

1.  Remove cup rest from drip tray and clean with warm soapy water, rinse with clean water and allow to air 

dry.

2. Wipe down the exterior of the unit with warm soapy water, rinse with clean water and allow to air dry. 

3. Remove valve nozzles and diffusers and wash in warm soapy water, rinse in clean water and allow to air 

dry. 

4. Clean the interior of the ice chute using the brush provided with the unit with warm soapy water, rinse 

with clean water and allow to air dry. 

5. Spray the ice chute inside and out with sanitizer and allow to air dry. 

6. Pour warm soapy water down the drains to keep them clean and flowing smoothly. 

7. Spray the nozzles and diffusers inside and outside with approved sanitizing solution, reinstall them on the 

valves and allow to air dry. 

8. Reinstall the cup rest into the drip tray. 

9. Pour all remaining sanitizer solution down the drains to help keep the drain clear. 

Daily Maintenance:

1.  Check the temperature, smell and taste of the product. 

2. Check the water pressure coming to the unit using the pressure gauges on the back room package. 

3. Check carbonation of the drink

4. Check level of CO2 supply to the system.

5. Check the date on all of the BIB’s (bags in boxes). 

Weekly Cleaning: (In addition to daily procedures) 

Remove the ice chute cover and clean it along with the back half with warm soapy using the brush provided with 
the unit. Rinse with clean water and reinstall on the unit. Spray the ice chute assembly with approved sanitizer 
allowing it to air dry. 

Содержание IDC 2XX













Отзывы: