Cornelius IDC 255 PROGATE DRIVE THRU UNIT, Руководство по установке, Страница: 21 / 39

IDC 255 Progate Drive Thru Installation Manual
© 2022, Marmon Foodservice Technologies Inc. - 19 - Publication Number: 621057419INS
7. Light: On start up of the unit or during a mode change (Manual to Progate) this light turns orange to inform the user that
the unit is going through a self diagnostic test. On completion of this test the light turns green to inform the user that the
machine is ready to dispense. If the light remains solid on red and the unit is not dispensing any ice when an ice portion is
pressed this should generate a service call. During ice dispense if there is insufficient ice in the ice chute then the light
turns red instantaneously to inform the user that there is insufficient ice. Once the user releases the portioned button then
the red light goes out.
8. Portion Up/Down Buttons: The program bar is only active in the program mode to change the ice dispense program size.
Programming (Changing) the Ice Portion
To change the size of any of the four ice dispense sizes follow the steps below.
1. To enter the program mode press the Program Button and Desired Size button at the same time and hold
for 5 seconds.
2. The Ice Portion Bar will come on
3. Press the RIGHT ARROW button to increase the amount of dispensed ice. The LED will move towards the right
indicating the Ice Portion has been increased.
4. Press the LEFT ARROW button to decrease the amount of dispensed ice. The LED will move towards the left indi -
cating the Ice Portion has been decreased.
5. To exit the program mode press the Desired Size button or wait 10 seconds and the control will return to the dis -
pense mode.
6. Place a cup under the ice chute and press the just programmed dispense size button If amount dispense amount is
not the desired amount repeat the process.
7. To exit, repeat Step 1