background image

Pinnacle Hot Gas Valve Replacement Installation Instructions

© 2007-2013, IMI Cornelius Inc.

- 1 -

Publication Number: 629091023INS

SAFETY INSTRUCTIONS

S

AFETY

!

WARNING

:

Before starting installation, read and understand all safety label and warnings on the machine. Also review and 
understand all safety instructions in the owners, installation and service manuals.

Failure to comply could result in serious injury, death or damage to the equipment.

Q

UALIFIED

 S

ERVICE

 P

ERSONNEL

!

WARNING

:

Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.

All wiring and plumbing must conform to national and local codes. Failure to comply could 
result in serious injury, death or equipment damage.

S

AFETY

 P

RECAUTIONS

This unit has been specifically designed to provide protection against personal injury. To ensure continued 
protection observe the following:

!

WARNING

:

Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all 
power is off to the unit before performing any work.

Failure to comply could result in serious injury, death or damage to the equipment.

CAUTION

:

!

Always be sure to keep area around the unit clean and free of clutter.

Failure to keep this area clean may result in injury or equipment damage.

Содержание FCB Pinnacle















Отзывы: