Cornelius CH 551, Руководство оператора и инструкция по установке

Страница: 8 / 14

CH550 and CH551 Chiller Operator’s & Installation Manual
Publication Number: 91272 - 4 - © 2002-2010, IMI Cornelius Inc.
Replacing Thermostat
1. Remove the wrapper, as described in
Removing Wrapper
.
2. Loosen the screw terminals securing the wires at the rear of the thermostat. Note connection points
and remove the wires.
3. Remove the screw securing the mounting bracket to the back of the thermostat.
4. Remove the thermostat from the front panel.
5. Install the new thermostat in the front panel and secure it with the mounting bracket.
6. Reconnect the wires at back of the thermostat.
7. Install the wrapper.
Replacing Fan Blade and/or Motor
1. Remove the wrapper, as specified in
Removing Wrapper
.
2. Remove the screws securing the fan guard to the fan shroud.
3. Remove the conduit connection at the back of the motor and disconnect the wire leads.
4. Remove the bolts securing the fan mounting bracket to the base and remove the fan/motor
assembly.
5. Separate the fan blade from the motor and install the new blade or motor.
6. Re-install the fan mounting bracket and fan guard. Re-connect the wire leads and conduit
connection.
7. Install the wrapper.
Replacing Pump
1. Remove the wrapper, as specified in
Removing Wrapper
.
2. Remove the clamps and hoses from the suction and discharge of the pump.
3. Remove the screws securing the pump to the base.
4. Disconnect the wire leads from the pump motor and remove the pump.
5. Remove all fittings from the pump and install them on the new pump.
6. Install the pump and re-connect wire leads and hoses.
7. Install the wrapper.