When selecting the site for your pool, take into account city by-
laws regarding fences and utilities laws pertaining to electrical
cables, as well as the landscaping which you are planning once
the pool is installed.
1)
Drive a stake into the ground at points A and B respecting the
distance of the straight section between those two points (A-B).
2)
Draw two half circles respecting the radius (R).
3)
Join the two half circles with straight lines respecting the width
between these two lines (D).
4)
Verify that the total length is consistent. (E)
5)
Add 15cm (6”) wide trenches on each side, respecting the lenght
(F), to leave room for the stays.
6)
Remove all grass from the area which you have just outlined.
Dear Customer
Congratulations! You have purchased a pool of superior quality and durability. To achieve the best possible results,
follow the instructions carefully. Failure to follow the installation procedures may result in damage to your pool or
property and void your warranty. We recommend that you make a preliminary study of the instructions booklet to
familiarize yourself with the different parts of your pool. Make sure that you understand each step thoroughly before
you begin assembling.
We wish you a most pleasant and refreshing summer.
WARNING: Be sure you have read and understood the “Safety Information” sheets be-
fore you begin your pool installation.
WARNING: For your safety, your pool is not designed for diving and/or jumping head first.
Please do not dive. Diving may result in permanent injury or death.
ASSEMBLY INSTRUCTIONS
OVAL POOLS
MODEL CANYON - SUNSET
SITE PREPARATION
1
A
B
A-B
R
R
D
15cm (6”)
E
F
POOL WALL
AREA TO OUTLINE
Figure 1.1
