CORN MACDON C HARVESTEC 6000, Руководство по установке

Страница: 6 / 24

Mounting Sensors
Center Rows
Headsight recommends mounting all sensors to center rows due to the
amount of poly that must be removed from outer row snouts to install the
sensor. If outer row mounting is prefered, see Outer rows below
1.
Mount sensor to HT
2217
bracket and tighten bolts.
2.
Loosely bolt rear U bracket to the HT
2217
rear hole
as shown.
•
20
”
- use HT
2218
•
30
” - use HT
2216
•
Use M
8
-
16
carriage bolt and flange nut
•
Nut must be on underside of bracket
3.
Remove OEM bolt holding snoot tip in place.
4.
Install sensor assembly onto bolt and
reinstall loosely into snout.
5.
Attach rear U bracket to threaded inserts.
6.
Tighten all hardware.
Harvestec 6000 Corn Bracket
M8x16 Flange Bolt
M10x25 Carriage Bolt
Bolt supplied with
Harvestec snout tip
M10x16 Flange Bolt
M10 Flange Nut
M8x16 Carriage Bolt
M8 Flange Nut
HT2217 HT2216
02
In
st
al
la
tio
n