25
Troubleshooting Guide
Corinex HD200 Powerline Wall Mount F
9
Troubleshooting Guide
The Corinex HD200 Powerline Wall Mount F has been designed to be a reliable
and easy-to-use network connection device. Please refer to the list below to aid in
troubleshooting.
The AP LED is off.
1. Make sure the power adapter is properly plugged directly into the
electrical outlet, and that the outlet has power.
2. Try another outlet.
The VPI LED is off (no connectivity between adapters).
1. Make sure the Powerline adapter is plugged directly into the outlet, rather
than into a surge suppressor or power strip. The current model of the
Powerline adapter
is not designed to function through a surge suppressor.
2. Try another outlet.
The ETH LED is off.
1. Make sure the adapter is connected with an Ethernet enabled device
with an RJ-45 cable and both devices are powered on.
If the trouble persists, please visit www.corinex.com and go to the appropriate
section for information on your product. There you will find news, manuals and
software updates, as well as frequently asked questions (FAQ).
To avoid personal injury and damage to the system:
1. The principal method to disconnect the device completely from the
electrical power network (mains) is to unplug the power cord from
the mains socket.
2. Never install the unit in wet areas or next to radiators/heaters.
3. Never use the unit outside.
4. Unplug the unit during severe storms.
5. Never open the equipment enclosure.
If, using the information sources listed above, you are not able to find a solution to
the problems you are experiencing, please send us a description of the problem
via
http://www.corinex.com
.
We will need all possible information about your
devices and your network in order to help you. This includes:
• Types of devices you have, if possible with serial numbers (printed on the
safety labels)
• Which of these devices are working incorrectly or don’t work at all (indicate
