Corinex HD200 Powerline Wall Mount F
23
Device specific parameters
8
Device specific parameters
This chapter describes autoconfiguration parameters and MIBs, that are specific for
the Corinex HD200 Powerline Wall Mount F. The general parameters can be found
in the remaining two documents: Alma auto-configuration and SNMP manual.
8.1 Enable/disable multicast aging
A new functionality was added in the firmware to enable/disable multicast aging. In
the auto-configuration file it is added as parameter:
MCAST_IGMP_AGING = [yes|no]
Default value is “yes”.
8.2 Enable/disable interface EXTA
It is possible to enable/disable the interface EXTA (Ethernet) by using either auto-
configuration file or SNMP.
A new parameter is added in auto-configuration file in order to enable/disable the
interface EXTA:
DISABLE_EXTA = [yes|no]
Default value is “no”.
Alternatively the interface EXTA can be enabled or disabled using SNMP:
private(4)
enterprises(1)
ds2 (6798)
wisconsin (3)
corinexMAC (20)
plCorinexDisExtA(2)
plDisExtA (1)
(0) INTEGER rw enable/disable interface EXTA.
