Corinex HD200 Powerline Wall Mount F
14
Configuring the DHCP / TFTP Server
5
Configuring the DHCP / TFTP Server
The HaneWin DHCP / TFTP server works based on profiles. For every lease,
there is a profile assigned. For a basic network, only two profiles are needed:
a Master profile and a Slave profile. The parameters defined in a profile are as
follows:
• Netmask
• Gateway
• TFTP server IP
• Auto-configuration file name
• DHCP extensions
Upon receipt of the DHCP reply, the modem will download the specified auto-
configuration file from the given IP address.
The first thing you need is a basic set of auto-configuration files. You can use
the examples provided in section 7 as a baseline. Create a new directory
and add to it those two files.
You must then specify this directory in the DHCP application, under
Options
>
Preferences
.
On the “
Interfaces
” tab, check the option “
Respond to registered (static)
addresses/identifiers only
”. Please pay attention to selection of interfaces.
Figure 3: Interfaces tab settings
