Corghi Artiglio Master Code Скачать руководство пользователя страница 60

Страница: 60 / 136

Artiglio Master Code

User Manual

Take care to avoid any injuries. Ensure that the top bead is correctly loaded on the tool
before carrying out mounting (Fig. 37h).

- Press the pedal

to start rotation until the second bead has been mounted.

Take care to avoid any injuries. Make sure the top bead is correctly inserted in the rim
well, throughout the mounting stage.

WARNING

- Remove the bead pressing pliers or the bead pressing tool.

At the end of the operation the machine will return to the main screen or will launch the
INFlATRON (optional), if active.

NOTICE

Position the bead pressing tool in the correct rest
position (Fig. 37i) so that it does not interfere
with the work area.

WARNING

- Take the bead breaker back to the top

and bottom

extremity (Fig. 37l).

- Withdraw the fixed tool

from the work area (Fig. 37m).

WARNING

37i

Содержание Artiglio Master Code









































































































































Результаты поиска

Содержание Artiglio Master Code

Отзывы:

Бренды по названию

Популярные бренды

Corghi Artiglio Master Code, Руководство пользователя

Результаты поиска

Содержание Artiglio Master Code

Отзывы:

Бренды по названию

Популярные бренды