N62 Piezo Nanopositioning Scanner User Manual
8
FIG.5 The load is applied to the center of the moving surface
FIG.6 Try not to let the position of the center of gravity far exceed the active platform
For the protection of the product, we do not recommend that the load is too high. If a
high load must be used, please appropriately low the position of the center of gravity of
the load. The wrong mounting way is shown in the figure below.
FIG.7 Do not mount long loads on one side of the platform
It is forbidden to mount the load on one side of the moving platform, which will cause
serious damage to the product, as shown in the figure below.
