User and Maintenance Manual
“G” Caliper brake
Model G-M
Date: 2013/07/01
Revision: 1
www.coremo.it
Pag.
9
di
11
The wrong number of turns of the handle produces a tangential force different to the
value indicated in this manual; the braking torque of the product will therefore be
different from the desired value and pose a risk to safety aspects.
8.2.
Improper use
The products considered here must be used exclusively as described in Chapter 5 of this
manual. Any other use is to be considered improper. The manufacturer declines all
responsibility for damage caused by erroneous or unreasonable use of the product.
Use of the product for purposes other than those stated in this manual may compromise
any aspect of safety.
9.
Maintenance and cleaning
ALL TYPES OF WORK ON THE BRAKE MUST BE DONE WITH THE MACHINE OFF..
Staff assigned to this work must wear suitable PPE such as gloves and safety footwear and take
any further precautions necessary to ensure adequate protection and prevent injury. Failure to
follow the instructions given for maintenance and cleaning of the product may compromise
personal safety and cause damage to equipment and machinery.
High temperatures may be produced after braking on the surfaces of the disc brake and
the brake linings. Personnel must therefore wait for parts subject to overheating to cool
down and wear suitable protective gloves and PPE.
9.1.
Readjusting the play
1.
Rotate the handle E80816 counterclockwise to open the brake.
2.
Loosen the ring nuts C61600 and the grub screw C61728.
3.
Rotate the play adjuster clockwise until the optimal play of 1 mm is obtained between the
disc and each brake lining (Figure 1 and Figure 2).
4.
Lock the nut C61600 and the grub screw C61728.
5.
Realign the brake shoes as described in point 5 of Chapter 7 (Figure 3).
