User and Maintenance Manual
“G” Caliper brake
Model G-M
Date: 2013/07/01
Revision: 1
www.coremo.it
Pag.
7
di
11
loosening the nut (C61600) with a n. 36 key and the grub screw (C61728) using a 5 Allen key.
Once the spacer has been removed, proceed with the installation.
1.
Mount the brake on a rigid flat surface of the machine or on a support capable of withstanding
a certain tangential force of 23100 N. The brake can be mounted in any position as it is
provided with a balancing system for the levers and alignment of the brake shoes.
2.
Anchor the brake to the supporting base using 3 class 8.8 M12 screws and a tightening torque
of 85 Nm.
3.
Adjust the screw located between the levers using a n. 10 spanner (Figure 1), until the weight
of the thruster is balanced; when balanced lock the screw by tightening the nuts.
Figure 1
4.
Adjust the play between the brake linings and the disc using the play adjuster and a n. 12 Allen
key, rotating in the appropriate direction (Figure 2); when a play of 1 mm has been obtained
between the disc and each brake lining, lock the adjuster in position screwing the nut (C61600)
all the way down using a n 36 spanner and locking the adjuster (C61728) using a n. 5 Allen key.
Figure 2
