User and Maintenance Manual
“G” Caliper brake
Model G-M
Date: 2013/07/01
Revision: 1
www.coremo.it
Pag.
8
di
11
5.
Adjust the brake shoes using the grub screw C61559 rotating it in the appropriate direction
with a n. 54 Allen key; the friction surface of the brake linings must be parallel to the surface
of the disc (Figure 3).
Figure 3
6.
To obtain the correct torque value rotate the handle E80816 in the clockwise direction until
the brake linings come into contact with the disc. Each rotation of 360° of the handle increases
the tangential force by 2100 N. The maximum tangential force of 21000 N is obtained with 10
12 rotations of 360°.
Do not apply the brake without the disc positioned between the brake linings; failure to
follow this rule could result in fingers being crushed and other dangers in addition to
damage to the brake itself.
7.
BEDDING-IN:
The initial braking torque may be from 30% to 50% less than the rated value until
the brake lining adjusts to the disc.
8.
Operation
8.1.
Performance of the product
Chapter 5.1 reports the tangential force provided by product and the relevant equation for
calculating the braking torque as a function of the diameter of the disc used.
The technical department of COREMO OCMEA can provide information, suggestions and
assistance for correct application and use of the brake.
