Corecess R1-SW24L2B, Руководство пользователя

Страница: 78 / 300

R1-SW24L2B User’s Manual
5-10
CLI Command Usage Basics
Entering CLI Commands
To executing a CLI command, you should enter both the command and it’s options. You can
execute the commands in the command mode which the prompt is locating now.
The CLI commands of the Corecess R1-SW24L2B have the following characteristics:
y
The CLI commands are case-sensitive.
y The CLI supports command completion, so you do not need to enter the entire name of a
command or option. As long as you enter enough characters of the command or option name
to avoid ambiguity with other commands or options, the CLI understands what you are
typing. For example, you can enter only
con t
to execute the
configure terminal
command at Privileged command mode.
localhost# con t
localhost(config)#
But if you enter only
co t
, the following error message will be displayed. Because there are
copy and configure command and the system can’t distinguish the two commands.
localhost# co t
% Ambiguous command :co t
y
To complete a command, press Tab key. If you enter a few known characters, then press Tab
key, the CLI displays the rest characters of the command. For example, if you enter only con,
then press Tab key, the CLI displays
configure
on the terminal.
y To display a list of available commands or command options, enter “?”. If you have not
entered part of a command at the command prompt, all the commands supported at the
current CLI mode are listed. If you enter part of a command, then enter “?”, the CLI lists the
options you can enter at the point in the command string.