Corecess R1-SW24L2B, Руководство пользователя

Страница: 150 / 300

R1-SW24L2B User’s Manual
8-16
Displaying SNMP Statistics
To display SNMP statistics, use the
show snmp-server statistics
command in
Privileged mode.
The following is sample output from the
show snmp-server statistics
command:
# show snmp-server statistics
10090 SNMP packets input
0 Bad SNMP version errors
96 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
28051 Number of requested variables
12 Number of altered variables
9854 Get-request PDUs
83 Get-next PDUs
12 Set-request PDUs
9994 SNMP packet output
0 Too big errors (Maximum packet size 1500)
3 No such name errors
0 Bad values errors
0 General errors
9994 Response PDUs
0 Trap PDUs
#
The table below describes the fields shown by the
show snmp-server statistics
command output:
Table 8-11 show snmp-server statistics field descriptions
Field Description
SNMP packets input Total number of SNMP packets input.
Bad SNMP version errors
Number of packets with an invalid SNMP version.
Unknown community name Number of SNMP packets with an unknown community name.
Illegal operation for
community name supplied Number of packets requesting an operation not allowed for that
community.
Encoding errors Number of SNMP packets that were improperly encoded.
Number of requested
variables
Number of variables requested by SNMP managers.