22
INSTALLING THE POWER CELL
– cont’d
2. Slide the Power Cell into the
matching cavity (3) in the rear of
the upper cowling (4).
NOTE:
Make sure you push the Power
Cell fully into the
cavity. The locking
latch (5) will click when the Power Cell
is properly installed.
3. Pull outward on the Power Cell to
verify that it is being held in place
by the locking latch.
To remove the Power Cell for
recharging or storage, press the locking
latch toward the Power Cell. While
holding the locking latch toward the
Power Cell, pull the Power Cell out of
the tool.
CARRYING THE HEDGE TRIMMER
WARNING:
Always remove the
Power Cell from the hedge trimmer and
install the blade guard when
transporting it from one location to
another, even if it is a short distance.
Once you have removed the Power Cell
and installed the scabbard, grasp the
forward assist handle with one hand
facing backward (Fig. 7). Always carry
the hedge trimmer with the cutting
blades facing behind your legs to avoid
them contacting any part of your legs.
HOLDING THE HEDGE TRIMMER
WARNING:
Always use two
hands when operating the hedge
trimmer to maintain proper control.
Grasp the front assist handle (1) with
one hand and the main handle (2) with
the other hand (Fig. 8).
ASSEMBLY AND OPERATING
Fig. 6
Fig. 7
!
!
Fig. 8