Core Health & Fitness Throwdown HIIT4, Руководство пользователя

Страница: 9 / 24

Page 8
2. Install a cross member weldment
between posts using four (4) pieces
of the long bolt assembly per cross
member.
• –
• –
• –
• –
• –
• –
x6
Fig. 7
3. Install a corner cross member between
posts using two (2) pieces of the long
bolt assembly where indicated by the
circles (Posts
, , , and ).
NOTE: The other side of the corner
cross members will be secured in Step
16.
• –
• –
• –
• –
x4
Fig. 8
4. Secure two (2) of the 6 foot monkey bar
sections together using a ratchet wrench
with a 19mm socket and sixteen (16)
pieces each of the M12 flat washers and
M12 x 30 mm hex head screw.
5. Set the 12 foot monkey bar section built
in Step 4 into place between the cross
members from posts
– and –
.
6. Repeat Steps 4 & 5 for the second 12
foot monkey bar section between cross
members from posts
– and –
.
x4
Fig. 9