Core Health & Fitness 9-ABR-3636-60, Руководство пользователя

Страница: 21 / 28

Page 20
6. Secure beam supports using
3 bolts and the supplied
hardware.
Fig. 36
7. Secure the bag swivel to the crossbeam/bag
hangar (shown)
a. Apply Loctite 242 to the bottom of the bolt.
b. Install the swivel including the antirotation
bracket using an 8mm allen key and an
adjustable wrench - ensure that the bearing
is sandwiched between the two washers.
c. Repeat this step as necessary.
NOTE: Apply low torque to the bolt but DO
NOT OVER-TIGHTEN. If the turret bolt is
overtightened, the swivel ring will not spin.
Check the swivel ring and confirm it can spin
freely
Anti-Rotation
Bracket
Apply
Loctite 242
Fig. 37
8. Units with external bag hangars
secure them to the 9’ beam
assemblies.
Fig. 38