Core Health & Fitness 9-ABR-3636-60, Руководство пользователя

Страница: 15 / 28

Page 14
Procedure
1. Place the upright weldments
in their install locations laying
down.
2. Install a one-sided corner
connector onto an upright
weldment, then secure the
upright weldment to the corner
connector using two open-
ended wrenches and the
supplied hardware. Repeat this
step three more times for a
total of four one-sided corner
connector upright weldment
assemblies.
3. Units with T connectors do the
same and have two T connector
upright weldment assemblies
each.
Fig. 24
4. Connect the four corner
connector assemblies built
earlier using two of the 18’
tubes and the supplied
hardware. (See Fig. 25)
Note: Units with T connectors
see Fig. 26.
Fig. 25
Fig. 26