Corby DP916, Инструкция по использованию и уходу

Страница: 9 / 12

0 9
SECTION 03
PLUG REPLACEMENT
(for product fitted with BS plug)
This appliance is NOT supplied with a plug fitted. If a plug is required, use a plug that is
fitted with a 13 Amp fuse. Should the fuse require replacement, it must be replaced
with a fuse rated at 13 Amp and approved to BS1362 by ASTA.
The wires in the mains lead on this appliance are coloured in accordance with the
following code:
As the colours may not correspond with the markings identifying the terminals in your
plug proceed as follows.
• The blue wire must be connected to the terminal marked N
• The brown wire must be connected to the terminal marked L
Important - any cut off plug should be disposed of safely to prevent hazard. There is
a danger of electric shock if a cut off plug is inserted into a socket outlet.
Neutral
Live
Blue -
Brown -
NOTE: In the case of the coloured
cable wires not corresponding with the
coloured markings in the plug follow
these steps
1. Connect BROWN wire to
terminal “L” (or coloured red)
2. Connect BLUE wire to terminal
“N” (or coloured black).
E
N
L
Neutral
(BLUE)
Live
(BROWN)
Fuse
(13 Amp)
Cord
Clamp