Corby DP916, Инструкция по использованию и уходу

Страница: 6 / 12

0 6
SECTION 03
INSTALLATION (WALL-MOUNTED)
Mark the wall with a pencil
to indicate the location of
the bracket.
Use a drill and 6mm
masonary bit to drill a hole
on the marked point.
Insert a wall plug into the
hole and secure the
bracket as shown using a
small screw.
Hang the base unit on the bracket. Align the product
with a spirit level and mark with a pencil through the
bottom hole.
Unhook the base unit and
drill into the wall at the
marked point.
Insert a wall plug into the
hole.
Re-hang the base unit and screw the large screw into
the hole. Cover the screw hole with the screw cover.
1. 2. 3.
4. 5.
6.
7.
OFF
ON