3
ML2000 Series Mortise Lock
Installation Instructions
Used with VN Escutcheon Trim and V Series Indicators
FM521 11/21
Copyright © 2019, 2020, 2021, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
1 Tools
Required
#1, #2 & #3
Phillips head
screwdrivers
Flat blade
screwdriver
Allen wrench:
• 1/8
"
for standard levers
• 3/32
"
for Muséo
®
levers
• 7/64
"
for EAC mortise locks
3/8
"
Drill bit
T-20 Torx Screw with
Tamper Pin Driver
2 Indicator
Variants
Depending on function and option ordered, indicators are provided in the following variations. These
instructions detail how to install with cylinder, however other variations follow similar instructions.
(Figure 1)
Contact factory with questions.
Cylinder
– For
installation on inside
or outside of door.
Coin Turn
– For
installation on
outside of door.
Thumbturn
- For
installation on
inside of door.
No input/blank
- For
installation on inside of door.
Figure 1
