7
Door adjustment:
The wheels at the top of the door may need adjusting so that the door slides freely and the magnetic door
seal meets evenly with magnetic frame profile when the door is closed.
a:
From outside the enclosure and with the door closed, adjust the screws on the top wheels. The bottom wheels should be
securely located in the bottom rail but the door must not be raised so high that the 'plungers' on the bottom wheels do not
operate.
b:
The 'plungers' on the bottom wheels can be pushed down to unclip the door which will allow access to clean the door and
fixed panel.
13
From inside
a
b
From inside the enclosure, position the top wheels into the top rail, push down the 'plungers' on both bottom wheels and position
into the bottom rail.
12
From inside
Top of door
Bottom of door
Adjust
from
outside
