3
Attach horizontal rails to top and bottom of the fixed panel using 4 x 32mm screws.
Important:
The rails are 'handed' in pairs, the hole in the rails must be on the inside next to the 'fixed' vertical channel.
Attach magnetic profile (PN80665) to horizontal rails using 4 x 32mm screws.
2
PN80665
a:
Important:
Carefully open a gap between the fixed panel and the bottom rail and apply sealant to the
front (outside)
and
edge
of the glass up to the 'flipper seals' as shown.
b:
Attach glass clamps to each horizontal rail (at edge of glass) using 10mm screws,
tighten by hand only - do not overtighten.
Push fit glass clamp covers.
3
PN80665
a
Inside
Inside
b
Hole
32mm
32mm
Inside
32mm
32mm
Inside
PN50489
PN50488
10mm
Bottom
