Coral JETCLEAN DF Series, Руководство по эксплуатации

Страница: 17 / 28

69
REPRODUCTION, EVEN IN PART, OF THE ILLUSTRATIONS AND/OR TEXT IS FORBIDDEN.
www.coral.eu
EC regulation maintenance and user Manual
4.5. SAFETY DEVICES
The machine is equipped at origin with all the protective systems needed to work safely.
Listed below are the systems adopted by
CORAL S.p.A. :
POS. ELEMENT DESCRIPTION
A CRANKCASE
The crankcase covers all the moving parts of the
machine, in order to prevent dangerous situations for
the operator.
B MAIN “ON-OFF” SWITCH
If set to "ON" the current goes to the machine, if set to
"OFF" the current is stopped.
WARNING!
The removal of the crankcase or safety systems typically causes the warranty to become
void the full assumption of responsibility by the user.
5. TRANSPORTATION AND INSTALLATION
5.1. TRANSPORTATION
The JETCLEAN DF filter is transported to the customer:
• assembled,
• packaged,
• palletized
Upon delivery of the machine:
STEP ACTION
1 Remove material from packaging.
2
Visually check that there was no damage during transportation and check the completeness of the
delivery. Otherwise tell your dealer as soon as possible and no later than 10 days after delivery.
WARNING!
Prior to any handling, disconnect the machine from the mains supply and from the
connections with utilities.
WARNING!
It is mandatory to electrically ground the filter by connecting the points of contact with
an adequately sized copper wire (a section of 2.5 mm2 is recommended), secured to the
manufactured product, taking care to maintain continuity.
5.2. INSTALLATION
The JETCLEAN DF filter for the design characteristics:
• is designed onboard the machine installed in the immediate vicinity of the utilities;
• It is connected by a rigid or flexible channelling to the connection system, which is equipped with the
machine tools.
For installation , follow the procedure below:
STEP ACTION
1
Connect the machine to the mains only after verifying the correct voltage and frequency indicated
on the engine nameplate.
2 Check the correct fan rotation indicated by the arrow on the engine crankcase.
3 Fit the suction arm by referring to the procedure in the manual.
4 Connect the pneumatic cleaning system to the compressed air system.